What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

An electrical problem that doesn’t let your car start and leaves you stuck in a parking lot or some place away from the fix that’s needed is an unwanted problem we all do our best to avoid. So what can you do to lessen the possibility of a possible unwanted situation that involves an electrical system crash in your vehicle?

First of all make sure you spend double the money on a good car battery. A lead acid battery can cost between $75 to $125 dollars. The only reason liquid lead acid batteries are the most commonplace is liquid lead acid batteries were first developed in 1859 and they are the least expensive in today’s world of automotive engine starting sources. In 1971 the sealed liquid lead acid battery was created that made it maintenance friendly.

VRLA (valve regulated lead acid) batteries include gel and absorbed glass mate which are not liquid. Gel batteries are as the name applies which is a “Gel”. AGM batteries are silicate glass fibers mixed with boron and formed into a mat that holds the electrolyte. Non liquid gel batteries were created in the late 1920’s and lead to the creation of the “Absorbed Glass Mat” batteries in 1957. The AGM (absorbed glass mat) battery was put into production in 1972 but mostly used for military applications and non vehicle applications like boats, motor homes, motorcycles and electronics. Nowadays you see more AGM batteries becoming available for use in production cars. AGM (absorbed glass mat) batteries can cost from $160 to $250 but have more advantages over liquid lead acid batteries.

AGM batteries are basically used in applications where the use of the vehicle is only used now and again as in boats and recreational vehicles. The non use discharge rate is much lower in non use applications than liquid lead acid batteries. The charge rate is much faster also. Some automotive manufacturers are installing AGM batteries as their standard new car power source because of today’s higher vehicle power consumption. BMW right now is known to be the first to install AGM batteries in their 2007 models because of computer functions and braking.

AGM batteries are much better than liquid lead acid batteries but the downside of AGM batteries is you don’t overcharge them. They will charge faster with a normal output alternator up to 14.5 volts and a high output alternator is not needed. When an AGM battery is used in a non use vehicle a solar panel is recommended with a trickle charge. AGM batteries will go bad if charged over 14.5 volts. Most problems with charging AGM’s are in sports vehicles due to the rough environment they are used in. Toss away your old plug in garage battery charger and get a new one that maintains “Voltage” instead of amps. An AGM battery charger will sense a very low voltage in the battery and will start the recharge whereas an old charger does not sense low voltage and will not charge the battery.

These batteries are used in military vehicles that sit in storage for many years and start up after years in storage with no problem. I’ve read stories online where people have left their AGM batteries sitting in their garage for many years and they have retained their full charge. I use AGM batteries in my vehicles and disconnect the negative cable in the one that I don’t use that often anymore and it starts right up when I run the engine occasionally. I’ve read complaints about the AGM failing often but that’s only because of bad practices with them or using them in systems where the charging exceeds the recommended level. You can leave these batteries sitting for long periods of time without charging them but it’s recommended that a solar panel with an extremely low trickle charge be used when not in use. Again I will say from my own experiences is to disconnect the negative cable to the battery when not in use.

The AGM vs Gel and the wet cell? The AGM has thicker plates that tend to not warp that easily during deep discharges and resist sulfur buildup’s that destroy a wet cell battery. Wet cell batteries usually go bad after 4 years if they make it that length of time. The life expectancy of the AGM battery can be up to 10 years if not overcharged. Gel cell batteries are great for sports vehicles but tend to charge slower.

The Winner Is, “Absorbed Glass Mat” if you learn how to take care of them properly.

Visit http://www.corriganmoving.com to find out more regarding moving services
Posted in homepage | Comments Off on What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

Sensible Manufacturing and the Ultrasonic Flow Meter

The Manufacturer MX Awards

Each year The Manufacturer MX Awards aim to recognise great achievements in the industry. Entries are invited for a number of different categories, with the ultimate title of ‘Manufacturer of the Year’ presented to a company that is strong across the board.

The winner of this year’s ‘Manufacturer of the Year’ title was announced in November and Dura Automotive took home the award. The company also returned to the office with awards for ‘People and Skills’, ‘World Class Manufacturing’ and ‘Sustainable Manufacturing’, so it was well worth attending the event!

Investment in Employees, Quality and Sustainability

Dura Automotive are an international company that design and manufacture control systems for the automotive industry. They may be a large operation, but the awards they won clearly illustrate what it takes to grow a successful business; investment in employees, quality and sustainability.

If you take a look on their website, you will see that their objectives are to ‘inspire drivers, customers, our people, the competition and stakeholders through innovation and performance’.

They understand that in order to deliver full customer satisfaction, they need to deliver high quality products. To do that, they need to stay ahead of the competition with innovative ideas, products and processes, staff training and development opportunities and a positive, customer focused vision. In addition, they understand the importance of integrating sustainability into every aspect of their business.

Sustainable Manufacturing

Sustainable manufacturing focuses on minimising the negative outcomes of production. The overriding aim is to lower the environmental impact of manufacturing and distribution, yet the real benefits to business come from the fact that in working towards sustainability is a process of continuous improvement.

Many manufacturers have been incentivised to take action. On the receiving end of Government initiatives or in a bid to reduce energy, water and waste management costs, more companies have been willing to consider sustainable options. Whilst they may have started off thinking of this as a tick box exercise, the real benefits of taking action soon become apparent. Huge savings have helped many companies to remain competitive in the global market, have paid for other investments or have boosted profits.

Flow Monitoring

When it comes to water and energy use, flow monitoring has proved valuable in running processes at optimised levels, improving quality control, minimising waste and reducing downtime due to problems in the process. This has supported significant cost savings in storage, processing, waste management and utility bills.

By investing in low cost ultrasonic flow meters, which retrofit to the exterior of pipework, flow monitoring can be straight forward to implement. Calibrated to the specific flow range of the liquid or gas that passes through the pipe, the ultrasonic flow meter provides data that quickly identifies when abnormal flow rates are detected. This acts as an early warning system, so the issue can be quickly identified and rectified.

The ultrasonic flow meter also supports the optimisation of the process, which can be highly effective in quality control. This has been widely used to reduce waste batches and waste management costs in food, pharmaceutical and automotive industries, to name but a few.

All of these potential cost savings from an affordable ultrasonic flow meter certainly justify investment in monitoring technology. Other low cost devices including tap aerators and rainwater harvesting systems have also helped UK businesses to gain a lot more than environmental credentials.

Recycled Materials

Another area in which Dura Automotive have invested is in research and developments around the use of recycled materials in their products. When manufacturers consider reusing materials rather than raw supplies, it can present a number of challenges. Being open minded to these challenges can lead to innovative thinking, fresh ideas and approaches which could open up new avenues for the product or company.

The use of recycled materials does depend on sufficient quantities being provided by a reliable source. Having said this, if a large scale operation such as Dura can find viable alternatives to raw materials, then a bit of research could lead to suitable supplies for smaller businesses.

There is often a cost in processing the material to ensure it is of a suitable standard for reuse. Companies may need to explore partnerships with other companies and other collaborative approaches to ensure that cost effective and convenient options are found.

Sustainable Advantages

Like Dura Automotive, the majority of the other manufacturing award winners also placed considerable emphasis on sustainability. If you want to see your company going from strength to strength, a greener approach could deliver many tangible advantages.

Posted in homepage | Comments Off on Sensible Manufacturing and the Ultrasonic Flow Meter

8 Best Tips For Solo Travelers

Traveling alone seems to be a pretty daunting thing to do. Ten questions come to your mind. What if you get stranded somewhere? Can you go out alone at night? Won’t it look strange to eat alone in a restaurant?

All these kinds of worries and other things like will I get attacked by thieves? Or what if my car gets stuck in a ditch? Plague the mind of many travelers before they go on their first solo trip. But once you know the benefits of solo traveling all these thoughts will instantly be removed from your mind. Here are 8 best tips for solo travelers that will help you in how to go alone without difficulty.

Plan In Advance – Before you travel, it’s best to do some planning. You don’t need to have a detailed plan, but you should at least know a few basic things like where you will stay? It’s best that you book your hotel before you leave.

Pack Less And Light – It’s always the best idea to pack light so that you can manage your luggage quickly without any assistance. One suitcase, backpack and carry on will suffice your requirement for a one or three week trip.

Try Traveling During Day Hours – I highly recommend that you should plan your arrival during the daytime so that you can find your way easily through an unfamiliar city.

Mingle With Others – When you are travelling alone, it’s a good idea to mingle with the other travellers. The lounges and common rooms of hotels are a great place to meet new people and make short term friends and get great travel advice.

Connect With Locals – Meet the locals, many cities have free local tour guides, but you can also connect with the locals through different websites and enjoy your vacation in a better way.

Look At The Things Around You – Take your time in observing your surroundings, watch how people interact with each other and how things work in that place. While sitting at a coffee shop, or park or just killing time walking around the city, you can learn how to pay your bill whether at the table or counter or how to hail a cab, etc.

Open Up – Honestly, speaking I know traveling alone seems to be pretty scary, you can get insecure easily and get all your defenses on, but that’s not the right approach its, best to talk to strangers, smile and start a conversation. Be curious and ask questions that seem important.

Enjoy Yourself As Much As You Can – Go out in evenings, go to different bars and pubs and grab a seat at the bar. Go to local drama shows or concerts, do everything that you want to do and enjoy your solo trip as much as you can.

Posted in homepage | Comments Off on 8 Best Tips For Solo Travelers

How to Make Social Media an Asset for Your Network Marketing Business

With many different social media platforms to choose from, your head may be spinning and you could be confused about which ones to use and why you would use them. In this article, we are going to talk about how to make social media an asset for your network marketing business.

Network marketing is very much a business of influence and emotion. If people don’t feel like working with you or they don’t feel like buying from you then they won’t. There are plenty of other people they can find your product and service through and that is why you want to use social as an asset to get in front of more people and help them choose you.

Building Know, Like & Trust

If people feel like they know, like and trust you because they have been following you on social, they are much more likely to buy from you than someone they just met. Social media can be used to share inspiring messages, family photos, dreams, and goals. Share these things with people and you they will be more likely to do business with you. This is one of the ways to make social an asset for your business.

Getting In Front of More Eyeballs

Social media helps you get in front of more people. Having a consistent social presence will help you leverage this virtual real estate to share your message with people. Instead of having to run around all over the place in your car, you can find people through social media and generate sales and new team members online.

It is very simple to be able to build social media into an asset but you have to be consistent. You at least want to post once a day so that you can stay top of mind with your audience.

Posted in homepage | Comments Off on How to Make Social Media an Asset for Your Network Marketing Business

What Is Computer Aided Engineering And Computational Fluid Dynamics?

Computer Aided Engineering (CAE)

CAE is the broad use of computer software with the aim to aid engineering tasks. It is a broad field that involves computational fluid dynamics, finite element analysis, optimization and multibody dynamics. Software tools developed to support the activities are known as CAE tools and they can be used in different application, including analyzing robustness and also performance of assemblies and components.

Computer aided design has indeed revolutionized modern engineering as it allows easier development of products and management integration of the same. It has also made modeling greater and offers basis for virtual networking. In the engineering world, the design is used widely to develop products to meet consumer expectations. It is this knowledge that makes engineering students and professionals important because of the benefits they bring to the engineering workforce.

Using computer aided engineering designs can be simulated in all kinds of scenarios without any physical change to the model. The technology is therefore widely applied to engineering applications. It comes with drawing benefits, project management benefits and networking benefits as well. It is applied to fields like aviation, space, shipbuilding and automotive industries. Computer aided engineering systems are supportive to businesses because they can place information views into the business process and make reference architectures useful especially when it comes to manufacturing models and products.

Computational fluid dynamics (CFD)

This is a discipline that falls under computer aided engineering and is used to engineer products and process designs as well as fabricate and analyze all elements involved in the processes. The technology also falls under fluid mechanics that rely on numerical methods and algorithms to analyze and solve problems that are related to fluid flow as well as heat transfer. Computational fluid dynamics are made up of three phases:

· Pre-processing that defined computation fluid dynamics models that include physics environmental factors, geometry and boundary conditions

· Analysis which offer solution of transport equation using the computational fluid techniques

· Post processing which involves results using visualization tools

CFD started way back in the 1960s with the first successes becoming prominent in 1970s. In services industry it took effect in the 1980s and the industry significantly expanded in the 90s. CFD packages continue to develop and significant changes are definitely expected in the future. The knowledge on how fluid flow and the quantitative effects of solids that are in contact helps:

· Architects and building service engineers to provide safe and comfortable human environments

· Power plant designer to achieve maximum efficiency and also reduce pollutant releases

· Chemical engineers in maximizing yields from processing equipment and reactors

· Designers of marine, air and land vehicles to achieve maximum performance at minimum costs

· Safety engineers and risk-and-hazard analysts to make predictions of the damage extent of structures, human beings, vegetation, animals and even equipment as a result of blast waves, explosions and fires

The flow simulation also proves helpful to the metropolitan authorities in determining pollutant emissions, meteorologists in foretelling water and wind current, petroleum engineers in designing oil recovery strategies among many other applications.

Posted in homepage | Comments Off on What Is Computer Aided Engineering And Computational Fluid Dynamics?

All You Need To Know About The PTFE Ring Gasket

Gaskets are one of the basic elements for preventing the leakage, mist formation, and spray outs after the flange guards. They are installed at the flange joints, pipelines or valve joints, etc. to prevent the leakage of the harmful gasses and liquids from the gap between the joints. The gaskets are proven to seal the gap between the surfaces of the joints and provide better protection at an affordable price. They bear the high pressure of the high-temperature chemicals and have corrosion resistance properties. They are used in many industries like automotive, aerospace, chemical industries, electronics, military industries, pharmaceuticals and appliances.

The Types Of The Loads That A PTFE Ring Gasket Bear Are As Follows:-

The initial compressive load is the bolt load which pulls the gasket material into surface defects to form a strong seal.
The hydrostatic end force which tends to separate the surfaces of the flange joints when the arrangement is over pressurized.
The internal load pulling the part of the gasket exposed to inner force. It tends to blow the seal out of the joint.
The various metals and materials are used to make gaskets which can meet the demand of various industries. The range covers non-metallic, semi-metallic and metallic gaskets. The industries mostly install PTFE ring gaskets which are made up of a material and provide better performance in the operation.

This type of the gaskets used widely in the chemical industries and pharmaceuticals because it avails numerous benefits, besides acting as the protective seal for the leakage. It reduces friction to provide a rigid usability and avoid any of the damage or failures.

There Are Many Factors That Are Affecting The Performance Of The Gaskets:-

The Flange Load – The pressure on the two surfaces of flange joints churns the product and compresses the gasket to create an even tighter seal. The gaskets are enough tough to bear this load and the bolts of the joints should be tightened enough to create a perfect seal.

Temperature – The high temperature sometimes affects the efficiency of the product, but the gaskets are made of the high-grade material which is actually temperature resistant.

Fluid – The chemicals flowing through the pipelines is highly corrosive in nature and the liquids are harder to sell in comparison to the gas. The PTFE ring gaskets seal the liquid and prevent it from flowing outside. The product also prevents the contamination of the liquid.

Posted in homepage | Comments Off on All You Need To Know About The PTFE Ring Gasket

Best Tips to Avoid Squandering Your Inheritance

When you receive an inheritance, it is important to figure out what will you do with that money. If you do not plan properly on how to spend that money, it will slip out of your hand within no time. If you have already got the cash, or you are about to inherit the money, here are some five tips for using it properly.

Don’t Rush Your Decision

People generally do not allow the money for a cooling-off period, after receiving the cash. This is one of the worst mistakes that people usually do. They are always in a hurry of spending the money without thinking twice. You can save the money either in a money market account or savings for at least two months in order to plan your options. You can also put the money into a short-term deposit for saving it, because you have to pay penalty if you withdraw it before time.

Assess Where You Are

If you analyse your present financial situation, you can get an idea about your future move. You can plan to start a college fund for your children, add the money to your retirement savings or keep it as an emergency fund. Make a goal in life, so that you can achieve it with the help of your inheritance.

Be Realistic About Your Inheritance

A sudden chunk of money will you lead to towards a changed lifestyle. The things like a new car or a luxury vacation that you could not afford before will now seem to be very tempting. You have to be careful to control your temptation and save your money for future needs.

Establish Boundaries

It is evident that when you receive an inheritance, many people come with a try to have a share in the money. Bank or financial sales people may call you so that you invest your money in their products. You may also be asked to make a huge donation by any charitable organisation. So, it is very important to set boundaries and prepare yourself for saying no to the people.

Be Proactive

You may need some professional help to figure out how to save your inheritance. It is absolutely fine to hire a financial advisor, but do not make your decision solely as per his guidance. In the end, it will be you who will take the final decision. Do some research and set your goals before taking professional’s help.

Thus, though an inheritance is like a blessing to you, but along with it comes responsibility. Plan properly to make sure that your money lasts for a longer time.

Posted in homepage | Comments Off on Best Tips to Avoid Squandering Your Inheritance

Stability, Predictability, Consistency, and Standardization in the Flow of Commerce

The best of all possible worlds is for the government to stay out-of-the-way of commerce, industry and business, and very rarely institute regulations. There are some times when government and businesses, industry associations should collaborate for the sake of standardization, but again, very rarely. The tendency to allow industry collusion, create monopolies, duopolies or quasi-cartels is just too easy. Further, once you create one regulation it’s hard to prevent the add-on affect, the temptation is just too great to add exceptions, additions, clarifications as lawyers, unions, and consumer groups work to lobby legislators to intervene with the regulatory apparatus.

A few years back this was a big conversation at our Think Tank, and one think tanker Andrew stated: “I would have to agree that businesses do need some form of standardization, but we must also understand several concepts! A business must have the capability to micromanage for maximum efficiency. I believe states should be granted the power to standardize businesses, not the federal government.”

Okay but, where I see the definite need for standardization are with things like Internet Protocols, railway track width, freeways for intrastate travel, airport runway markings, frequencies used in communication, food safety, etc. In a big state like TX you could get away with doing almost everything counter to the overall prevailing way of doing things, it’s practically large enough to be its own country, and some Texans would prefer it to be still. Pretty independent minded, even with the population’s mindset of succession from the union. It even has its own electrical grid.

Still, with regards to the flow of energy, transportation, distribution, communication, currency, etc. we need standardization. And to the point of having each state decide, what about every county, every city, or every HOA, down to every person, where do you stop the breakdown of centralized standardization.

The argument for state level standardization could be argued against by someone who is a County Supervisor telling the State to go to hell, we want to do it our way, especially a county like the County of Los Angeles, with 16 million people in it, also larger than most countries. How about a city telling the county where to go, again as an example, let’s take the City of Los Angeles VS County of Los Angeles, see the point.

And realize I am not making an argument for a global government here, but we also need some standardization there too, for aviation, which we do have, maritime, trade rules, and having the Central Banks work together so no one Central Bank doesn’t destroy the entire global economy. See that point. We need SOME standardization, but we MUST retain regional variation. We do this at the Global Level, but we don’t do it enough at our Federal Level with regards to the states in the US and that’s why we have issues now. Think on this.

Posted in homepage | Comments Off on Stability, Predictability, Consistency, and Standardization in the Flow of Commerce

The Best Places To See If You Go To Italy

Ravioli, Tiramisu and lush red wine- we all know how amazing all of these things are in Italy. But another thing that Italy is famous for are its beautiful and renowned travel destinations. This country is filled with remnants of the Roman Civilization and extraordinary architecture from the past. What most of us don’t know is that Italy is actually home to the largest number of UNESCO World Heritage sites. Literally everything in this country is worth seeing. But for those of us, who don’t want to or don’t have enough time to go through the whole countryside, here is a list of places you can visit to ensure you get the best of Italy:

1. The Leaning Tower Of Pisa:
This architectural beauty is actually a mathematical phenomenon that still confuses many brilliant minds. The tower of Pisa, famous for its incline is actually a wonder of the world which the most important reason for you to see it. And if you’re a fan of archeology then that’s an added bonus as well. People from all over the world come here all year round to view this. And if you’re planning to go to Italy as well make sure you book your tickets using Alaska Airlines.

2. The Colosseum:
The Roman Colosseum is also one of the Wonders of the world and is the largest amphitheatre in the world. This was created by the prehistoric Roman Leaders and is one of the biggest mementos of the Roman Civilization. It has more than 80 entrances and can house more than 50,000 people at one time. This amphitheatre was actually made as a center of sports and entertainment and has hosted several such events throughout history. However, its condition has deteriorated significantly over time due to natural disaster and climatic conditions.

3. Venice:
The city of Gondolas and water, Venice is a sight to behold for anyone who loves water. The city is famous worldwide for its beauty and the fact that it has been built completely on water. If you’re a romantic at heart, then this is the one place that you should definitely not miss out on. The structures here are comprised of over 150 canals in such an intricate manner that further enhances the beauty of the city.

4. Piazza Del Campo:
The city of Tuscany is home to one of the most beautiful and magnificent medieval squares – The Piazza Del Campo. This seems to be very common in Italy, but this structure also has some of the beautiful architecture that has been seen in the world. Twice or thrice a year a horse race is hosted here which involves circling the Piazza Del Campo and that is definitely a sight to see.

So book your ticket to Italy today using Alaska Airlines and remember to have a lot of fun and stress less holiday!!!

Posted in homepage | Comments Off on The Best Places To See If You Go To Italy

Useful Tips for Choosing an Airport Taxi Service

Getting to the airport isn’t the easiest thing and can be more difficult for those travelling with a lot of luggage and family members. One option to forget about the logistics of reaching the airport on time is to make use of an airport taxi service. This can remove a lot of the stress and worry, but is still important to schedule the pickup to match the specific needs.

Here are a few tips to make sure the airport taxi service provides a prompt and timely package:

Plan ahead

A simple step that can make things go smoothly is to book the taxi well in advance. Make sure there is enough time to easily reach the airport without feeling rushed. Try to calculate the travel distance and add an extra hour or more in the event of heavy traffic. Also, if travelling during busy travel times, such as bank holidays, it may be worth adding a little more time.

Pay attention to reputation

Investigate two or three different companies and aim to identify one that is highly rated for providing a reliable deal in the local area. Use online reviews to get an idea of the quality and reputable of a potential company. Find one that has the courteous drivers and appreciated for providing timely pickups and drops-offs.

Most companies are quite similar, so it helps to ring around and get a price for the ride to the airport. Many quote a flat fee to travel from home to the airport, as well as any other pickups on the way. Also, make sure the preferred company has the necessary licensing and credentials to offer this particular type of service.

Amount of space

One of the important things to check is the amount of space for passengers and luggage that the vehicle can accept. The vehicles can vary significantly in size with a standard vehicle able to accept a couple with minimal luggage to the larger vehicle that can easily take six or seven passengers in comfort.

For those travelling with a lot of bags, it may be necessary to ask for a larger vehicle.

Call before pickup

Even if the airport taxi service has been booked and reserved in advance, it still may be worth giving the company a call a few hours before it should arrive at the pickup address to make sure it will be arriving on time.

Posted in homepage | Comments Off on Useful Tips for Choosing an Airport Taxi Service